™

Guardian Polymers also offers a Foam/Cellulose Insulation System

What is Cellulose Insulation?
Guardian Polymers offers a spray-in-place cellulose insulation product that is applied to the wall cavities of new construction. It is installed to a density of 3.0 to 3.5 lbs./ft.3 and will not settle in the wall cavity. Fibers attach to the sheathing and studs, forming a seamless bond inside the wall cavity.

Guardian Polymers WALLSEAL is sprayed in place, eliminating the voids and air pockets common with other insulation materials. Density, or weight per cubic foot, which is important in reducing air infiltration and increasing Effective R-value, is more consistent with Guardian Polymers WALLSEAL system. The builder and the homeowner can actually see the insulation in place and know that all of the areas in a wall are insulated.

Guaranteed Energy Program

Guardian Polymers Insulation out-performs conventional insulation. This is guaranteed.

Using detailed blueprints before construction begins, our company offers homebuyers a three year guarantee on the cost of energy with a Foam/Cellulose design.

How does WALLSEAL compare in performance to other insulation products?
Using Engineered Cellulose Insulation is more than a smart choice for it’s comfort benefits, WALLSEAL is environmentally friendly even in the manufacturing process. Fiberglass insulation is made by melting sand and recovered glass in gas-fired furnaces. It takes at least 8,500 BTU’s of energy to produce a pound of fiberglass insulation. Cellulose insulation is produced by processing post-consumer recovered paper through electrically driven mills. Estimates for the embodied energy of a pound of cellulose vary from 150 to 750 BTU’s. Converting this to BTU’s-per-R, it takes at least 40 times more energy to make fiberglass insulation than to produce cellulose insulation.

WALLSEAL is a premium insulation system.  Homeowners, builders, and architects choosing this system are concerned about energy cost, sound control, and overall comfort. The installers of the WALLSEAL system are factory trained and certified professionals, and are equipped with specialized machines designed for this application. The increased efficiency of the WALLSEAL system, along with Cellulose Insulation in the attic, saves homeowners as much as 40% on heating and cooling costs.

How does WALLSEAL compare in cost to other insulation products?  WALLSEAL is a premium insulation system. Homeowners using this system are concerned about their comfort level as well as energy costs. The installers of the WALLSEAL system are factory trained and equipped with specialized machines unique to this application. The additional up front cost of the WALLSEAL system is quickly offset by the energy savings generated by this insulation, as much as 40% on heating & cooling bills.

Guardian Polymers, Inc. Engineered Cellulose Insulation is Best for Your Home
Independent studies by universities and research labs have shown that on the basis of installed thermal protection performance, a cellulose insulated building will obtain better performance under real-world conditions than a conventionally insulated building of otherwise similar construction. Savings are on the order of as much as 40% according to field studies.

Since less energy is used to manufacture cellulose insulation, and the resulting buildings perform closer to calculated expectations (meeting or exceeding predicted values), their fuel savings translate into lower atmospheric emissions such as CO2 implicated in global warming, and other air-pollutants from electrical power and on-site combustion sources known to produce acid-rain and smog.